Panasonic AJ-HPD2500 Operating Instructions - Page 189
Fs-20, Fs-18, Ch1-4, Embd Ch Sel
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Setup Item FR SUPER No. DISP. 776 REF LEVEL 778 AUD OUT DLY 782 EMBD CH SEL 785 PB MIX Subscreen 01 PB CH1 02 PB CH2 03 PB CH3 04 PB CH4 790 VOL SEL Setting FR SUPER No. DISP. For AJ-HPD2500P 0000 FS-20 0001 0002 FS-18 FS-12 For AJ-HPD2500E 0000 0001 0002 FS-20 FS-18 FS-12 0000 0001 OFF ON 0000 0001 0002 CH1-4 CH5-8 CH1-8 0000 0001 OFF ON Settings and brief function description Specifies the standard level. 0: -20 dB 1: -18 dB 2: -12 dB 23.98Hz 24Hz 59-23Hz 60-24Hz only Determines whether or not the output timing of analog audio output, headphones output, monitor output and AES/EBU output are delayed to synchronize them with SDI output. 0: Not delayed The output is synchronized with LCD monitor and VIDEO OUT output. 1: Delayed The output is synchronized with SDI output. NOTE: LCD monitor and VIDEO OUT are output about 66 msec earlier than SDI output. 59.94Hz 50Hz 23.98Hz 29.97Hz 59-23Hz 25Hz 60-25Hz only Selects channels to multiplex on the SD SDI output. 0: Outputs four channels (CH1-4). 1: Outputs four channels (CH5-8). 2: Outputs the CH1-8 channels. NOTE: • Four channels (CH1-4) are multiplexed during DVCPRO and DVCPRO50 playback. • Some devices may not be able to receive 8 channels. Check the specifications of the receiving equipment before setting CH1-8. • Invalid signal is output at 24 Hz and 60-24 Hz. Sets a mix of analog and SDI audio output. NOTE: Press the STOP or SET button to open a subscreen and select the channels used in mixing audio output. To exit the subscreen, press the STOP or SET button again. 0000 0001 0002 0000 0001 0002 0000 0001 0002 0000 0001 0002 0000 0001 CH1 CH1+2 CH1+3 CH2 CH1+2 CH2+4 CH3 CH3+4 CH1+3 CH4 CH3+4 CH2+4 CH1-4 CH1-8 Specifies the playback channels that will be output via CH1. Specifies the playback channels that will be output via CH2 Specifies the playback channels that will be output via CH3. Specifies the playback channels that will be output via CH4. Specifies operation of the recording level controls. 0: CH1 to CH4 only are variable, CH5 to CH8 are UNITY level. 1: In addition to CH1 to CH4, which are variable, CH5 to CH8 also become variable, being linked to CH1 to CH4 operation. Setup: Item Settings 189