Panasonic AJ-HPD2500 Operating Instructions - Page 148
Clip Select Function, About the Clip Select Function, Canceling Clip Select
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Clip Select Function About the Clip Select Function Use the clip select function to play back only one clip. Clip Select Setting 1 3 2 ◆ NOTE: • The clip select function is available when setup menu No.25 (SYSTEM FREQ) is set to 50 or 59.94. • The CLIP SELECT function cannot be applied to clips in a hard disk. • The clip select function does not work in the AVCHD mode. • The CLIP SELECT function is not available on the playlist player thumbnail screen. • If playback is started immediately after a USB, eSATA or LAN cable was disconnected and re-connected in the fixed delay mode, video dropouts may occur, or the fixed delay mode may be canceled. • In clip select status, recording, play list, thumbnail screen, switching devices and other functions may not be available. • When the CLIP SELECT button is on, the time that elapses from pressing the PLAY button until start of playback is the fixed delay. (Fixed delay) Canceling Clip Select 1 Open the thumbnail screen. 2 Use the cursor to select the clip to be played back. 3 Press the CLIP SELECT button. The CLIP SELECT button lights and the first frame or thumbnail position*1 of the clip appears. Playback in clip select mode does not differ from normal playback, but enables playback with fixed delay. During playback the CLIP SELECT button flashes but the unit stays in clip select status. Pressing the CLIP SELECT button when it is flashing in playback stop mode or playback pause mode changes flashing to steady light. When the CLIP SELECT button is lit, the unit is in PB mode regardless of PB/EE mode setting. Changing the initial position will cause the CLIP SELECT button to flash and cancel fixed delay. Press the CLIP SELECT button to turn it on, and fixed delay resumes. *1:This depends on the value set in setup menu No. 165 (CLIPSEL MODE) (page 179). 3 1 Press the SHIFT and CLIP SELECT buttons simultaneously. The CLIP SELECT button goes off. ◆ NOTE: • The clip select status can be canceled only in playback stop mode. • When playback is stopped by pressing the STOP button during the CLIP SELECT mode, or if the CLIP SELECT mode is canceled, the thumbnail screen does not return. 148 Clip Select Function: About the Clip Select Function