Panasonic AJ-HPD2500 Operating Instructions - Page 170
Setup: Item Settings, HD SYS H ADV
View all Panasonic AJ-HPD2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Item FR SUPER No. DISP. 19 SCH FINE(SD) 20 AV PHASE 25 SYSTEM FREQ 26 HD SYS H ADV 30 MENU LOCK Setting FR SUPER No. DISP. 0000 -32 | | 0032 0 | | 0064 32 0000 | 0128 | 0255 -128 | 0 | 127 For AJ-HPD2500P 0000 59.94 0001 0002 0003 0004 0005 0006 0007 0008 50 23.98 24 29.97 59-23 60-24 25 60-25 For AJ-HPD2500E 0000 0001 0002 0003 0004 0005 0006 0007 0008 59.94 50 23.98 24 29.97 59-23 60-24 25 60-25 0000 0H 0001 90H 0000 0001 OFF ON Settings and brief function description 59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz only Adjusts the SCH phase of analog composite output (total variable range ±45° or more). Changes the SC phase but not the H phase. Covers ±180° in combination with No. 18 SCH COAR(SD). Adjusts audio output phase relative to video output (in 20.8 µs steps). -: Advances audio output phase relative to video output. +: Delays audio output phase relative to video output. Sets system frequency. 0: 59.94 Hz 1: 50 Hz 2: 23.98 Hz 3: 24 Hz 4: 29.97 Hz 5: 59-23 Hz Receives 59.94 Hz input. Select this frequency to record 2:3 pull-down converted (24-frame signal) output from VariCam: AJ-HDC27 series camera, AJ-HPX2700 or other camera. 6: 60-24 Hz Receives 60Hz input. Select this frequency to record 2:3 pull-down converted (24-frame signal) output from VariCam: AJ-HDC27 series and AJ-HPX2700 series camera. 7: 25 Hz 8: 60-25 Hz Receives 60 Hz input. Select this frequency to record a variable frame rate set to 25p from VariCam: AJ-HDC27 series camera. 59.94Hz 29.97Hz only Specifies whether or not HD SDI output should advance 90H phase relative to SD REF input during SD REF input. 0: Outputs HD SDI at the same phase as SD REF. 1: HD SDI output is output at a phase that is 90H advanced relative to SD REF. NOTE: • The audio output and TC output are output in the same phase as HD SDI output. • At 720p, the phase difference is 120H. Sets/releases the system file lock mode. 0: Releases the lock (file data can be changed) 1: Lock is engaged (file data cannot be changed) 170 Setup: Item Settings