Ricoh 2051 Operating Instructions - Page 103
Using Job Preset in Connect Copy
View all Ricoh 2051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Using Job Preset in Connect Copy Using Job Preset in Connect Copy You can make settings for the next Connect Copy job when the current job is still in progress on the main machine. When the current job finishes, E Press the {Start} key on the main machine. Scanning begins. the next job begins automatically. As soon as the current job is fin- Note ❒ You can preset a maximum of eight jobs. A On the main machine, confirm ished, the next job starts automatically. When placing originals in the 3 ADF that "Press [New Job] to make reservation." is displayed, and then press [New Job]. A The main machine scans the originals. Copying starts on the sub-machine when the data transfer is completed. B Confirm that "Ready" is dis- played, and then press [ ]. C Place the originals in the main machine. Reference See p.9 "Placing Originals". D Confirm that "Ready" is dis- played, and then make settings for the job. When placing originals on the exposure glass A After the first original is scanned, place the next one and press the {Start} key. Press the {#} key when you have finished scanning all the originals. B The main machine scans the originals. Copying starts on the sub-machine when the data transfer is completed. Note ❒ Preset jobs in Connect Copy mode can only be changed when • the main machine has finished scanning the originals. • copying has yet to begin on either machine. Reference p.21 "Job Preset" 93