Ricoh 2051 Operating Instructions - Page 160

Specifications ❖ Duplex • You cannot use the following copy paper with this function: • Paper smaller than A5, 51/2" × 81/2" (possible on A5K, 51/2" × 81/2"K) • Paper thicker than 105 g/m2, 28 lb. • Paper thinner than 60 g/m2, 17 lb. • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Postcards • When an odd number of originals is placed in the ADF, the back of the last page of copied paper is blank. • During copying, the image is shifted to allow for the binding margin. ❖ Combine • In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of originals. 6 • The reproduction ratios you can specify are 25-400%. • If the calculated ratio is under the minimum ratio, it will be automatically adjusted to within acceptable range. However, with some ratios, parts of the image might not be copied. • You cannot use custom size paper. • If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly. • If the number of originals placed is less than the number specified for combining, the last page segment will be left blank as shown. ❖ Copying Book Originals • The machine sets the reproduction ratio automatically to meet paper size and copies originals together onto the paper. • The machine uses ratios in the range of 25 to 400% • If the calculated ratio is under the available minimum, it will be adjusted to minimum ratio. However, with some ratios, parts of the image might not be copied. 150