Ricoh 2051 Operating Instructions - Page 145

Settings You Can Change with User Tools Note ❒ Default: • Finisher 3000B (100-sheet staples): Top Slant • Finisher 3000M (50-sheet staples): Top Slant • Booklet finisher: Saddle Stitch ❒ The optional finisher is required to use this function. ❖ Select Stapling Position (Top Right) Specify which the type of stapling to be shown on the bottom right key of the initial display. Note ❒ Default: Top 2 ❒ The optional finisher is required to use this function. ❖ Select Stapling Position (Bottom Right) Specify which the type of stapling to be shown on the bottom right key of the initial display. Note ❒ Default: Left 2 ❒ The optional finisher is required to use this function. Input/Output P.2/2 ❖ Select Stack Function Specify whether Stack or Rotate Sort has priority on the initial display. Note ❒ Default: Stack ❒ The optional finisher is required to use this function. ❖ Select Punch Type Specify which the type of punch to be shown on the initial display. Note ❒ Default: 2 Holes 5 ❒ The optional finisher is required to use this function. ❖ Letterhead Setting If you select [Yes] for this function, the machine rotates images correctly. Note ❒ Default: No ❒ Orientation-fixed (top to bottom) or two-sided paper might not print correctly depending on how the originals and paper are placed. Reference When using letterhead paper, pay attention to the paper orientation. See "Orientation-Fixed Paper or Two-Sided Paper" in "Loading Paper", General Settings Guide. ❖ Eject Copy Face Up/Down in Glass Mode You can specify the way in which copies are delivered when copying an original placed on the exposure glass. 135