Ricoh 2051 Operating Instructions - Page 121
If You Cannot Make Copies As You Want
View all Ricoh 2051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
If You Cannot Make Copies As You Want If You Cannot Make Copies As You Want Problem Causes Solutions Copies are not stapled. There are jammed staples in the stapler. Remove jammed staples. See "Removing Jammed Staples", General Settings Guide. Note ❒ After removing jammed staples, staples might not eject the first few times you try to use the stapler. The number of copies ex- Check the stapler capacity. See p.144 ceeds stapler capacity. "Staple". 4 Copy paper is curled. Turn the copy paper over in the tray. Paper jams occur frequent- The paper size is not cor- ly. rect. Set the correct paper size. See "Changing the Paper Size", General Settings Guide. You cannot combine sever- Selected functions cannot Check the combination of functions al functions. be used together. and make the settings again. Reference ⇒ p.137 "Combination Chart" When sorting, the pages are divided into two blocks. The memory became full in the middle of sorting and the pages were delivered in two blocks. You can interrupt copying when the memory becomes full. ⇒ p.134 "Memory Full Auto Scan Restart" In Double Copies mode, Combination of original Select A3L for A4 K originals and parts of the original image and copy paper is not cor- A4 for A5 originals (when using a are not copied. rect. 100% ratio). In Border, Center, or Center/Border mode, parts of the original image are not copied. You have set an erase mar- Set a narrower margin with the User gin that is too wide. Tools. You can set a margin between 2-99mm. Originals are not scanned Set the originals correctly. correctly. In Margin Adjustment mode, parts of the original image are not copied. You have set an erase margin that is too wide. There is a lack of margin space on the opposite side of the binding position Set a narrower margin with the User Tools. In Image Repeat mode, the original image is not copied repeatedly. You selected copy paper the same size as the originals, or you did not select the proper reproduction ratio. Select copy paper larger than the originals. Select the proper reproduction ratio. 111