Ricoh 2051 Operating Instructions - Page 41

Copier Functions B Enter the ratio. Note ❒ You cannot use the bypass tray To select the ratio using [n] and with this function. [o] ❒ When using Auto Reduce/En- large, see the following table for A Select a preset ratio close to the original sizes and orientations you ratio using [Reduce] or [Enlarge]. can use: B Adjust the ratio further, using [n] or [o]. ❖ Metric version 2 Note ❒ Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in increments of 10%. ❒ If you have incorrectly entered the ratio, readjust it using [n] or [o]. Where original is placed Exposure glass ADF Original size and orientation A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 13"L A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISKL, 11"× 17"L, 81/2" × 11"KL To enter the ratio using the number keys A Press [Mag. Ratio]. B Enter the ratio using the num- ber keys. C Press [#]. D Press [OK]. C Place the originals, and then press the {Start} key. Auto Reduce/Enlarge The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. ❖ Inch version Where original is placed Exposure glass ADF Original size and orientation 11" × 17"L, 81/2" × 14"L, 81/2" × 11KL A3L, A4LK, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"KL, 10" × 14"L, 71/4" × 101/2"KL Reference p.12 "Sizes difficult to detect" A Press [Auto Reduce/Enlarge]. 31