Ricoh 2051 Operating Instructions - Page 135

Settings You Can Change with User Tools ❖ Connect Copy Key Display You can specify whether or not to display the key for Connect Copy. Note ❒ Default: Display General Features P.2/5 ❖ Duplex Mode Priority You can select the type of the Duplex function effective when the power is turned on, or modes are cleared. Note ❒ Default: 1 Sided→2 Sided ❖ Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies. Note ❒ Default: Top to Top ❖ Original Orientation in Duplex Mode You can set the original orientation when making two-sided copies. Note ❒ Default: Top to Top ❖ Change Initial Mode You can select standard mode or Program No.10 as the mode effective when power is turned on, or modes are cleared. Note ❒ Default: Standard ❖ Max. Copy Quantity The maximum copy quantity can be set between 1 and 999. Note ❒ Default: 999 Sheets ❖ Tone: Original remains The beeper (key tone) sounds if you forget to remove originals after copying. Note ❒ Default: On ❒ If Panel Tone in User Tools (System Settings) is [Off], the beeper does not sound, whatever the Tone: Original remains setting. See "Panel Tone" in "General Features", General Settings Guide. ❖ Job End Call You can choose to have the beeper sound when copying is complete. 5 Note ❒ Default: On ❒ If Panel Tone of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as: the paper tray ran out of paper, or a paper misfeed occurred. General Features P.3/5 ❖ Copy Function Key: F1-F5 You can assign frequently used functions to function keys F1 to F5. Note ❒ Default: • Copy Function Key: F1: 1 Sided→2 Sided: T to T 125