Ricoh R4 User Guide - Page 122
Changing File Name Settings, SEQUENTIAL NO.
View all Ricoh R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Changing File Name Settings (SEQUENTIAL NO.) When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned. When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card. Available Settings ON (Continue numbering) OFF (Do not continue numbering) *Default setting File names are automatically assigned to still images you take, in the format of "R" followed by seven digits, from R0010001.jpg to R9999999.jpg. With this setting, file numbering is continued from one card to the next. File numbering is assigned, from RIMG0001.jpg to RIMG9999.jpg, for each SD memory card. When file name RIMG9999 is reached, no more data can be recorded to that card. To change the file name setting, follow the steps below. 1. Display the SETUP menu. For the operating procedure, see P.111. 2. Press the " button to select [SEQUENTIAL NO.] and press the $ button. 3. Press the !" buttons to select the desired setting. 4. Press the C/D or # button. 5. If you pressed the # button in Step 4, press also the C/D button. This setting is used until it is changed. 120