Ricoh R4 User Guide - Page 92
Switch the Mode Selector
View all Ricoh R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Note • When shooting with S-CONT or M-CONT, the ISO setting is fixed at [AUTO] even if it is set to [ISO 64] or [ISO 100]. • The maximum number of images that can be shot in the Multi-Shot Mode depends on the image size setting, as shown in the table below. • The numbers of images that can be shot in the Multi-Shot Mode with the internal memory are as shown in the table below. Digital Zoom: Off F2816 N2816 F3:2 F2048 N2048 F1280 N1280 N640 5 5 5 5 5 13 13 13 Digital Zoom: On 5 5 5 5 5 13 13 13 • The shot images can be recorded normally until the SD memory card becomes full. Once the number of consecutively shot images exceeds the number of images shown in the table above, however, the image recording speed becomes slow. (This depends on the image size setting.) 1. Switch the Mode Selector to 5. 2. Press the C/D button. The Shooting Setting menu is displayed. 3. Press the " button to select [CONT. MODE] and press the $ button. 4. Press the !" buttons to select [CONT.], [S-CONT], or [M-CONT]. 5. Press the C/D or # button. 6. If you pressed the # button in Step 5, press also the C/D button. The Shooting Setting menu closes and the Multi-Shot symbol appears on the screen. 90