Sony DCR-PC9 Operating Instructions - Page 155

"Memory Stick" Operations Preventing accidental erasure - Image protection To prevent accidental erasure of important images, you can protect selected images. Before operation Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY. Make sure that the LOCK swich is set to the right (unlock) position. (2) Press INDEX on your camcorder to display the index. (3) Press "- MARK." The screen to protect the image appears. (4) Press the image you want to protect. The "-" appears on the protected image. 2 INDEX VCR 1 POWER LOCK LOCK MEMORY OFF CAMERA (CHARGE) 3,4 -MARK -MARK MARK DEL EXIT 1 2 3 4 5 6 T 1 / 40 t RET -MARK EXIT 1- 2 3 4 5 6 T 2 / 40 t To return to FN Press EXIT. To cancel image protection Press the image you want to cancel image protection in step 4 again. The "-" disappears. Note Formatting erases all information on the "Memory Stick", including the protected image data. Check the contents of the "Memory Stick" before formatting. If the write-protect tab on the "Memory Stick" is set to LOCK You cannot carry out image protection. 155