Sony DCR-PC9 Operating Instructions - Page 27
Recording a picture, Using the zoom feature
View all Sony DCR-PC9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Recording - Basics Recording a picture Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings. "T" side: for telephoto (subject appears closer) "W" side: for wide-angle (subject appears farther away) W T W W T T To use zoom greater than 10× Zoom greater than 10× is performed digitally. To activate digital zoom, select the digital zoom power in D ZOOM in the menu settings. The digital zoom function is set to OFF as a default setting (p. 105). The right side of the bar shows the digital W T zooming zone. The digital zooming zone appears when you select the digital zoom power in the menu settings (p. 105) When you shoot close to a subject If you cannot get a sharp focus, move the power zoom lever to the "W" side until the focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch) away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch) away in the wide-angle position. Notes on digital zoom •Digital zoom starts to function when zoom exceeds 10×. •The picture quality deteriorates as you move the power zoom lever toward the "T" side. When the POWER switch is set to MEMORY You cannot use the digital zoom. 27