Sony DCR-PC9 Operating Instructions - Page 99

Editing Superimposing a title If you set the write-protect tab to lock You cannot superimpose or erase the title. Slide the write-protect tab to release the write protection. To use the custom title If you want to use the custom title, select in step 3. If the tape has a blank portion You cannot superimpose a title on the tape. If the tape has a blank portion in the middle of the recorded parts The title may not be displayed correctly. The titles superimposed with your camcorder •They are displayed by only the DV format video equipment with index titler function. •The point you superimposed the title may be detected as an index signal when searching a recording with other video equipment. If the tape has too many index signals You may not be able to superimpose a title because the memory is full. In this case, delete data you do not need. Not to display title Set TITLE DSPL to OFF in the menu settings (p. 105). Title setting •The title color changes as follows: WHITE t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE •The title size changes as follows: SMALL y LARGE You cannot input 13 characters or more in LARGE size. If you input more than 12 characters, the title size returns to SMALL even you select LARGE. •If you select the title size "SMALL", you have 9 choices for the title position. If you select the title size "LARGE", you have 8 choices for the title position. One cassette can have up to about 20 titles, if 1 title consists of 5 characters However, if the cassette memory is full with date, photo and cassette label data, one cassette can have only up to about 11 titles with 5 characters each. Cassette memory capacity is as follows: - 6 date data (maximum) - 12 photo data (maximum) - 1 cassette label (maximum) If the " FULL" mark appears The cassette memory is full. Erase the title you do not need. 99