Sony DCR-PC9 Operating Instructions - Page 16
Step 1, Preparing the power supply, Connecting to a wall outlet
View all Sony DCR-PC9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 1 Preparing the power supply Connecting to a wall outlet When you use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack on your camcorder with the plug's v mark facing the Holding Grip. (2) Connect the power cord to the AC power adaptor. (3) Connect the power cord to a wall outlet. 1 2,3 PRECAUTION The set is not disconnected from the AC power source (house current) as long as it is connected to a wall outlet, even if the set itself has been turned off. Notes • The AC power adaptor can supply power even if the battery pack is attached to your camcorder. • The DC IN jack has "source priority." This means that the battery pack cannot supply any power if the power cord is connected to the DC IN jack, even when the power cord is not plugged into a wall outlet. Using a car battery Use Sony DC Adaptor/Charger (optional). 16