Toshiba Tecra A2-S239 Maintenance Manual - Page 113

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST, the following message will appear: SYSTEM TEST NAME XXXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end [Ctrl]+[C] ; key stop SUB-TEST : XX PASS COUNT: XXXXX WRITE DATA: XX ADDRESS : XXXXXX ERROR COUNT: XXXXX READ DATA : XX STATUS : XXX SUB-TEST MENU : 01 - ROM checksum 02 - Dock/UnDock 03 04 - Fan ON/OFF 05 - Geyserville 06 - Quick charge 07 - DMI read 08 - DMI write 09 - CPU Thermistor 10 11 - System LED 99 - Exit to DIAGNOSTIC TEST MENU NOTE: The menu displayed by your computer may be slightly different from the one shown above. Select the desired subtest number from the subtest menu and press Enter. The following message will appear: TEST LOOP : YES (or NO) ERROR STOP : YES (or NO) Use the right and left arrow keys to move the cursor to the desired option. Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle. Selecting NO returns the process to the subtest menu after the test is complete. Satellite A50/TECRA A2 Maintenance Manual (960-478) 3-5