Toshiba Tecra A2-S239 Maintenance Manual - Page 215

4.3 Memory Module 4 Replacement Procedures 4.3 Memory Module CAUTION: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself. Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems. Never press hard or bend the memory module. Removing the memory module To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-3, 4-4). 1. Turn the computer upside down. 2. Loosen the screw (with e-ring) securing the memory slot cover. 3. Remove the memory slot cover from the edge near the screw. Memory Slot Cover Screw with e-ring Figure 4-3 Removing Memory Slot Cover Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-11