Toshiba Tecra A2-S239 Maintenance Manual - Page 151

3.18 IEEE1394 Test 3 Tests and Diagnostics 3.18 IEEE1394 Test This section describes how to perform the IEEE1394 test with the test program. Toshiba MS-DOS is required to run the DIAGNOSTICS TEST PROGRAM. To start the DIAGNOSTIC TEST PROGRAM, follow these steps: NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test. (a) Insert the Diagnostics disk in the floppy disk drive and turn on the computer. (The Diagnostics Disk contains the MS-DOS boot files.) The following menu will appear: * * IEEE1394 [TSB!"LV28] test menu ( For Repair ) VX.XX * * * * Select test No. and [Enter] * * * 1 : ... Ieee1394 test * * 2 : ... Responder tool * * 3 : ... ID Check * * * Select [1-3]? (b) To execute the TEST, select the test number you want to execute and press Enter. Subtest 01 IEEE1394 test This program checks the data transporting between responder machine and target machine. Subtest 02 Subtest 03 Responder tool This program initializes the machine responder. ID Check This program checks the GUID. Satellite A50/TECRA A2 Maintenance Manual (960-478) 3-43