Toshiba Tecra A2-S239 Maintenance Manual - Page 233
Switch Board, Replacement Procedures
View all Toshiba Tecra A2-S239 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
4.9 Switch Board 4.9 Switch Board 4 Replacement Procedures Removing the Switch board The following describes the procedure for removing the switch board (See Figure 4-20). 1. Open the display and unlock the connector. Disconnect the switch board cable from the connector on the system board. 2. Remove the following screw securing the switch board. • M2.5x2.8B THIN BIND screw x1 3. Slide the switch board to the left and remove it. M2.5x2.8B THIN BIND Switch Board PJ3280 Switch Board Cable PJ3200 Figure 4-20 Removing Switch Board 4. Unlock the connector and disconnect the switch board cable from the switch board. Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-29
4.9
Switch Board
4
Replacement Procedures
Satellite A50/TECRA A2
Maintenance Manual (960-478)
4-29
4.9
Switch Board
Removing the Switch board
The following describes the procedure for removing the switch board (See Figure 4-20).
1.
Open the display and unlock the connector. Disconnect the
switch board cable
from
the connector on the system board.
2.
Remove the following
screw
securing the
switch board
.
•
M2.5x2.8B
THIN BIND screw
x1
3.
Slide the switch board to the left and remove it.
Figure 4-20 Removing Switch Board
4.
Unlock the connector and disconnect the switch board cable from the switch board.
M2.5x2.8B
THIN BIND
Switch Board
PJ3280
PJ3200
Switch Board Cable