Toshiba Tecra A2-S239 Maintenance Manual - Page 241
Sound Board, Removing the Sound Board
View all Toshiba Tecra A2-S239 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
4.12 Sound Board 4 Replacement Procedures 4.12 Sound Board Removing the Sound Board The following describes the procedure for removing the sound board (See Figure 4-26). 1. Unlock the connector and disconnect the sound board cable from the connector of the system board. 2. Remove the following screw to remove the sound board. • M2.5x4B THIN BIND screw Sound Board PJ9510 x1 M2.5x4B THIN BIND Sound Board Cable PJ9500 System Board Figure 4-26 Removing Sound Board 3. Unlock the connector and disconnect the sound board cable from the connector on the sound board. Installing the Sound Board The following describes the procedure for installing the sound board (See Figure 4-26). 1. Connect the sound board cable to the connector PJ9510 on the sound board. 2. Install the sound board from the side with the volume on the base assembly and secure with the following screw. • M2.5x4B THIN BIND screw x1 Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-37