Toshiba Tecra A2-S239 Maintenance Manual - Page 152

3 Tests and Diagnostics 3.19 Wireless LAN Test (Atheros) 3.19 Wireless LAN Test (Atheros) This section describes how to perform the wireless LAN transmitting-receiving test with the test program. NOTE: Use another computer (with Atheros wireless LAN card) that can communicate by the wireless LAN as a responder machine to perform this test. It is recommended to conduct this test in the environment where any other wireless networks such as Bluetooth is not used nearby. In this test, the following items are tested: (1) SKU (destination code) check (2) Mac Address check (3) Communication test (for 11a mode) (4) Communication test (for 11g mode) (5) Communication test (for 11b mode) This program conducts the above test items 2) to 5) continuously and displays results for each item during the test. However, only the destination code and the last result for the other test items shall be checked. (The message "OK" or "NG" is displayed.) NOTE: Before starting the wireless LAN test, make sure the Wireless Communication Switch on the left side of the computer is turned on. (The Wireless Communication LED lights orange.) 3-44 Satellite A50/TECRA A2 Maintenance Manual (960-478)