Toshiba Tecra A2-S239 Maintenance Manual - Page 217

MDC Modem, MDC Modem, Replacement Procedures, CAUTION

Page 217 highlights

4.4 MDC Modem 4.4 MDC Modem 4 Replacement Procedures Removing the MDC Modem The following describes the procedure for removing an MDC modem (See Figure 4-5). CAUTION:Since the MDC slot cover is easily broken, remove the memory cover first before removing the MDC slot cover. When replacing the MDC mode, The power must be turned off when you remove the MDC modem. Removing an MDC modem with the power on risks damaging the modem or the computer itself. 1. Turn the computer upside down. 2. Loosen the screw (with e-ring) securing the MDC slot cover and remove the cover. 3. Remove the following screws fixing the MDC modem. • M2x4Z BIND screw x2 4. Lift up the MDC modem to remove it from the connector on the system board. 5. Remove the MDC cable from the connector on the MDC modem. Screw with e-ring MDC Slot Cover M2x4Z BIND MDC Cable PJ3020 MDC Modem Figure 4-5 Removing MDC Modem Satellite A50/TECRA A2 Maintenance Manual (960-478) 4-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338

4.4
MDC Modem
4
Replacement Procedures
Satellite A50/TECRA A2
Maintenance Manual (960-478)
4-13
4.4
MDC Modem
Removing the MDC Modem
The following describes the procedure for removing an MDC modem (See Figure 4-5).
CAUTION
:Since the MDC slot cover is easily broken, remove the memory cover first
before removing the MDC slot cover.
When replacing the MDC mode, The power must be turned off when you
remove the MDC modem. Removing an MDC modem with the power on risks
damaging the modem or the computer itself.
1.
Turn the computer upside down.
2.
Loosen the
screw (with e-ring)
securing the
MDC slot cover
and remove the cover.
3.
Remove the following
screws
fixing the
MDC modem
.
M2x4Z
BIND screw
x2
4.
Lift up the MDC modem to remove it from the connector on the system board.
5.
Remove the
MDC cable
from the connector on the MDC modem.
Figure 4-5
Removing MDC Modem
M2x4Z
BIND
MDC Slot Cover
MDC Modem
PJ3020
Screw with e-ring
MDC Cable