Toshiba Tecra A2-S239 Maintenance Manual - Page 92
Procedure 5, Connector Check and Replacement Check, Troubleshooting Procedures, 5 HDD Troubleshooting
View all Toshiba Tecra A2-S239 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
2 Troubleshooting Procedures 2.6 2.5" HDD Troubleshooting Procedure 5 Connector Check and Replacement Check The HDD is connected to the connector of the system board. The connecting portion may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks to check the connecting portion: Check 1 Make sure the following connectors are firmly connected to the system board. If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. Check 2 The 2.5" HDD may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. 2-38 Satellite A50/TECRA A2 Maintenance Manual (960-478)