Toshiba Tecra A2-S239 Maintenance Manual - Page 216

4 Replacement Procedures 4.3 Memory Module 4. Open the left and right latches and remove the memory mo dule. SLOT A: Standard Memory Latch Latch SLOT B: Expansion Memory Memory Module Figure 4-4 Removing Memory Module Installing the memory module Before installing the memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figure 4-3, 4-4). 1. Insert the memory module into the connector of the computer slantwise (terminal side first) and press it to connect firmly. CAUTION:The power must be turned off when you insert a memory module. Inserting a memory module with the power on might damage the module or the computer itself. When installing only one memory module, install it SLOT A. Otherwise, it might damage the module or the computer itself Never press hard or bend the memory module. 2. Install the memory slot cover from the front side edge and secure it with the supplied screw. 3. When the power of the computer is turned on, the computer checks automatically the memory size. Confirm that the new memory is detected correctly. 4. If the memory is not detected, make sure it is connected surely. 4-12 Satellite A50/TECRA A2 Maintenance Manual (960-478)