Toshiba Tecra A2-S239 Maintenance Manual - Page 236

4 Replacement Procedures 4.10 Optical Drive 3. Remove the following screws fixing the rear bracket from the DVD-ROM drive assembly. • M2x2.7 STEP screw x2 4. Remove the following screw fixing the side bracket and remove the side bracket. • M2x3S SUPER THIN BIND screw x1 Side Bracket DVD-ROM Drive Assembly Rear Bracket M2x3S SUPER THIN BIND Figure 4-22 Removing DVD-ROM Drive (2) M2x2.7 STEP Installing the Optical drive The following describes the procedure for installing the optical drive (See Figure 4-21, 4-22). 1. Install the side bracket on the DVD-ROM drive and fix it with the following scre w. • M2x3S SUPER THIN BIND screw x1 2. Place the rear bracket on the DVD-ROM drive and fix it with the following screws . • M2x2.7 STEP screw x2 3. Insert the DVD-ROM drive assembly into the slot to connect it to the connector PJ1810 on the system board. 4. Secure the DVD-ROM drive assembly with the following screw from the bottom of the computer. • M2.5x6B THIN BIND screw x1 4-32 Satellite A50/TECRA A2 Maintenance Manual (960-478)