Toshiba Tecra A2-S239 Maintenance Manual - Page 174

3 Test and Diagnostics 3.27 Floppy Disk Drive Utilities 3. COPY program (a) When COPY is selected, the following message appears: FLOPPY DISK FORMAT & COPY : VX.XX Type select (0:2DD,3:2HD) ? (b) Select a drive type number. Selecting 3:2HD will display a message similar to the one below. Select a media type number. 2HD media mode (1:1.20MB, 2:1.44MB) (c) The following message will appear: Insert source disk into drive A: Press any key when ready. (c) Remove the Diagnostics Disk from the FDD, insert the source disk and press any key. The following message will appear, indicating the program has started. [ FD TYPE ] : TRACK [ FD TYPE ] : HEAD [ FD TYPE ] : SECTOR Copy start = XXX = X = XX [[ track,head = XXX X ]] (d) Remove the source disk from the FDD, insert a formatted work disk and press any key. The following message will appear and start copying to the target disk. Insert target disk into drive A: Press any key when ready. [[ track,head = XXX X ]] (e) When the amount of data is too large to be copied in one operation, the message from step (c) is displayed again. After the floppy disk has been copied, the following message will appear: Copy complete Another copy (1:Yes/2:No) ? (f) To copy another disk, type 1 and the message from step (a) is displayed again. Entering 2 returns the test program to the DIAGNOSTIC MENU. Satellite A50/TECRA A2 Maintenance Manual (960 -478) 3-64