Toshiba Tecra A2-S239 Maintenance Manual - Page 115

3.3 Setting of the hardware configuration 3 Tests and Diagnostics 3.3 Setting of the hardware configuration To execute this program, select 2-Repair initial config test from the startup menu, press Enter and follow the directions on the screen. The H/W initial information setting tool consists of four subtests. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 Initial configuration This subtest executes the following items and shows their contents in the display. When an item ends normally, the program proceeds automatically to the next one. When an error is found, the program stops and waits for key input. (After solving the problem, the program executes the item again.) When the DMI information is displayed, the program waits for key input of DMI information. Then, input the DMI information. For more details on DMI information, refer to "Subtest 08, DMI write" in the System test. Setting of the CPU set table Setting of the micro code Inputting or writing of DMI information (RAM, text) Setting of the HWSC Setting of the UUID Display of the DMI information (including UUID) Subtest 02 After completion of the above settings, the DMI information and the H/W configuration & DMI information are appeared in order. Check the contents and press Enter. Region write This subtest executes the setting of the region code for DVD drive. The following message appears in the display. Press any key to return to the H/W initial information setting tool menu. ####### It completed ######## * * Press any key to continue... Satellite A50/TECRA A2 Maintenance Manual (960-478) 3-7