Toshiba Tecra A2-S239 Maintenance Manual - Page 194

3 Test and Diagnostics 3.29 SETUP (b) Ext Keyboard "Fn" This option enables or disables Fn key function on the external keyboard. Enabled Enables the feature. Disabled Disables the feature. (Default) When "Enabled" is selected, the following sub-window appears. Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer's internal keyboard. Setting a Fn key equivalent will enable you to use "Hotkeys" by pressing the set combination in place of the Fn key. The following items can be selected for this option: = Left Ctrl + Left Alt (*1) = Right Ctrl + Right Alt (*2) = Left Alt + Left Shift = Right Alt + Right Shift = Left Alt + Caps Lock NOTE: If these selections ((*1) or (*2)) are made, you cannot warm boot the system by pressing Ctrl + Alt + Del. (c) Parallel Port Mode Use this option to set information of Parallel Port Mode. ECP Std. Bi-Direct. Sets the port mode to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) Sets the bi-directional setting. This setting should be used with some other parallel devices. NOTE: When using Windows, the setting of "Toshiba HW setup" is enabled and the setting of "Parallel Port Mode" is disabled. Satellite A50/TECRA A2 Maintenance Manual (960 -478) 3-84