Yamaha RX-V3900BL Owner's Manual - Page 107
Loading the system settings, Using examples, Loading by the, buttons
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
ADVANCED OPERATION Saving and recalling the system settings (System Memory) Loading the system settings Note If you load the system settings, the settings currently configured are overwritten. If you do not want to erase the current settings, save the settings using the System Memory feature in advance. ■ Loading by the 7SYSTEM MEMORY buttons You can recall the system settings stored in "Memory1" to "Memory4" by pressing the corresponding 7SYSTEM MEMORY buttons. 1 Press one of the 7SYSTEM MEMORY buttons on the remote control to select the desired memory number. "Memory1 LOAD" (example) appears in the front panel display. SYSTEM MEMORY 1 2 3 4 y "Empty" appears in the menu screen if no system settings are stored in the selected memory number. 2 Press the selected 7SYSTEM MEMORY button once more to confirm the selection. This unit loads the settings stored in the selected memory number. ■ Loading by the GUI menu operation 1 Follow steps 1 to 4 in "Saving by the GUI menu operation" (page 101). Using examples ■ Example 1: Comparing the results of the automatic setup and manual setup This unit is equipped with three types of parametric equalizer settings (page 91), and you can also make your customized configuration of the sound settings of this unit by using the "Speaker" parameters (page 87). To compare the results of the automatic setup or your manual configuration, use the 7SYSTEM MEMORY buttons. SYSTEM MEMORY 1 Results of the automatic setup (PEQ Select: Natural) SYSTEM MEMORY 2 Results of the automatic setup (PEQ Select: Front) SYSTEM MEMORY 1 2 3 4 SYSTEM MEMORY 3 Settings configured manually Saving each setting 1 Perform the automatic setup (page 30). 2 Press and hold 7SYSTEM MEMORY 1 for 4 seconds. This unit stores the results of the automatic setup (PEQ Select: Natural) to "Memory1". 3 Set "PEQ Select" to "Front" (page 91). 2 Press 9k / n repeatedly to select "xxx Load" and then press 9h. "xxx" indicates the zone you selected in step 1. 3 Press 9k / n repeatedly to select the desired memory number and then press 9h. y If the memory number you selected is empty, "Memory Empty" appears. 4 Press 9ENTER to load the settings stored in the selected memory number. y To cancel the operation and return to the previous menu level, press 9l. 5 Press IMENU to turn off the GUI menu. 4 Press and hold 7SYSTEM MEMORY 2 for 4 seconds. This unit stores the results of the automatic setup (PEQ Select: Front) to "Memory2". 5 Configure the parameters of "Speaker" (page 87) and parametric equalizer configuration of each speaker manually (page 91). 6 Press and hold 7SYSTEM MEMORY 3 for 4 seconds. This unit stores the settings configured manually to "Memory3". English 103 En