Yamaha RX-V3900BL Owner's Manual - Page 50
Using CINEMA DSP 3D mode, Enjoying unprocessed input sources, Press, repeatedly to turn on or off
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Sound field programs Before performing the following operation, set the operation mode selector on the remote control to FAMP. Before performing the following operation, set the operation mode selector on the remote control to FAMP. Using CINEMA DSP 3D mode CINEMA DSP 3D mode creates the intensive and accurate stereoscopic sound field in the listening room. You can activate and deactivate the CINEMA DSP 3D mode. Press P3D DSP repeatedly to turn on or off the CINEMA DSP 3D mode. While this unit is in the CINEMA DSP 3D mode, the 3D indicator lights up. Note CINEMA DSP 3D does not activate ("3D:--" appears) in the following cases: - the "Front Presence" setting is set to "None" (page 88). - no CINEMA DSP is selected. - headphones are connected to the PHONES jack. Enjoying unprocessed input sources When this unit is in the STRAIGHT mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing. Press NSTRAIGHT (or TSTRAIGHT) to select "STRAIGHT". The names of the audio signal format of the input source and the active decoder appear in the front panel display. To deactivate the STRAIGHT mode Press NSTRAIGHT (or TSTRAIGHT) again or select another sound field program (page 40). 46 En