Yamaha RX-V3900BL Owner's Manual - Page 122

Using multi-zone configuration ■ Using the internal amplifiers of this unit Important safety notice The speaker terminals of this Receiver should not be connected to a Passive Loudspeaker Selector Box or more than one loudspeaker per channel. Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low impedance load resulting in amplifier damage. See this owner's manual for correct usage. Compliance with minimum speaker impedance information for all channels must be maintained at all times. This information is found on the back panel of your Receiver. If you want to use one internal amplifier (SP1 or SP2) of this unit Connect the Zone 2 or Zone 3 speakers directly to the SP1 or SP2 speaker terminals. If you want to use two internal amplifiers (SP1 and SP2) of this unit Connect the Zone 2 and Zone 3 speakers directly to the SP1 and SP2 speaker terminals. PRESENCE/ZONE 2/ZONE 3 R SP1 L + ZONE 2/ZONE 3 R SP2 L + Speakers (Zone 2) Speakers (Zone 3) This unit ■ Connecting zone video monitors Connect the video monitor(s) in Zone 2 and/or Zone 3 to the ZONE VIDEO jacks. If you connect the multiple zone video monitors to ZONE VIDEO jacks, the video monitors play back the same source simultaneously. This unit ZONE VIDEO Source component V Video In V Video In Video monitor (Zone2) Video monitor (Zone3) 118 En