Yamaha RX-V3900BL Owner's Manual - Page 27

PREPARATION Connections ■ Connecting to the network To connect this unit to your network, plug one end of a network cable (CAT-5 or higher straight cable) into the NETWORK port of this unit, and plug the other end into one of the LAN ports on your router that supports the DHCP (Dynamic Host Configuration Protocol) server function. The following diagram shows a connection example where this unit is connected to one of the LAN ports on a 4-port router. To enjoy music files saved on your PC and Yamaha MCX2000, access the Internet Radio, or control this unit by using your PC, each device must be connected properly in the network. Notes • You must use an STP (shielded twisted pair) cable (commercially available) to connect a network hub or router and this unit. • If the DHCP server function on your router is disabled, you need to configure the network settings manually (page 95). • Yamaha MCX-2000, MCX-A10 and MCX-C15 may not be for sale in some locations. Internet Yamaha MCX-2000 Yamaha MCX-C15 WAN LAN Modem Yamaha MCX-A10 (with optional speakers) PC Router Network cable NETWORK ■ Connecting a USB storage device Connect a USB memory device or USB portable audio player to the USB port on the front panel of this unit. For information about the USB storage devices supported by this unit, see page 69. INFO S USB English USB memory device or USB portable audio player 23 En