Yamaha RX-V3900BL Owner's Manual - Page 118
MCR 1, M:DVD, Programming macro operations
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Remote control features ■ Programming macro operations You can program your own macro to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro. Notes • The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared. • It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents. • We do not recommend that you program continuous operations (for example, volume control) in a macro. 1 Press GSETUP using a ballpoint pen or similar object. "SETUP" appears in the display window (4). 2 Press 9k / n repeatedly to select "MACRO" and then press 9ENTER. 3 Press the desired macro button you want to assign the macro program to and then press 9 ENTER. "M:the three-letter name of the selected macro button" (for example, "M:DVD") and the name of the currently selected control area appears in the display window (4) alternately. When you press DSTANDBY or EPOWER, "M:STB" or "M:PWR" and the name of the currently selected control area appears in the display window (4) alternately. 4 Press the buttons for the functions you want to include in the macro operation in sequence. Example Set the input source to DVD → Turn on the DVD player → Turn on the video monitor Step 1 ("MCR1"): Press DVD. Step 2 ("MCR2"): Press AV POWER. Step 3 ("MCR3"): Press TV POWER. POWER POWER STANDBY TV AV 3 2 MULTI V-AUX PHONO POWER DOCK BD HD DVD CBL SAT TUNER DVD CD 1 TV DVR XM SIRIUS MD CD-R VCR USB NET MCR 1 Indicates the number of macro steps entered M:DVD (Selected macro button) Flashes alternately so you can set the next step DVD (Selected control area) Notes • To change the selected input area, press 5SELECT l / h. Pressing the input selector buttons will program a macro step, whereas 5SELECT l / h only changes the selected input area. • The position of the operation mode selector (AMP/TV/ SOURCE) affects the assigned function. When the operation mode selector is set to FAMP or FTV, the input source selectors do not function. 5 Press HMACRO to confirm the program. You can set up to 10 steps (10 functions). After you have set 10 steps, "FULL" appears and the remote control automatically exits from the macro programming mode. 6 Press GSETUP again to exit from the setup menu. Note "ERROR" appears in the display window (4) if you press more than one button simultaneously. 114 En