Yamaha RX-V3900BL Owner's Manual - Page 125
Advanced setup, Using the advanced setup menu
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Advanced setup ADVANCED OPERATION This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. Notes • Only AMASTER ON/OFF, NSTRAIGHT and the MPROGRAM selector are effective while you are using the advanced setup menu. • All the other operations cannot be made while you are using the advanced setup menu. • The advanced setup menu is only available in the front panel display. Using the advanced setup menu ■ Remote sensor REMOTE SENSOR Use this feature to activate or deactivate the signal- receiving capability of the remote control sensor on the 1 Press AMASTER ON/OFF on the front front panel of this unit. panel to release it outward to the OFF Choice Descriptions position to turn off this unit. ON Select this setting if you want to activate the signal-receiving capability of the remote control 2 Press and hold NSTRAIGHT and then sensor. press AMASTER ON/OFF inward to the ON OFF position to turn on this unit. This unit turns on, and "ADVANCED SETUP" Select this setting if you want to deactivate the signal-receiving capability of the remote control sensor. appears in the front panel display. Note STRAIGHT EFFECT While holding down MASTER 3 Rotate the MPROGRAM selector to select the parameter you want to adjust. We recommend setting the parameter to "ON" in most cases. ■ Wake on RS-232C access RS232C STANDBY Use this feature to set this unit to transmit data via the RS232C interface when this unit is in the standby mode. Choice Functions 4 Press NSTRAIGHT repeatedly to change the selected parameter setting. 5 Press AMASTER ON/OFF to release it outward to the OFF position to save the new setting and turn off this unit. YES NO Select this setting to set this unit to transmit data via the RS-232C interface. Select this setting to set this unit not to transmit data via the RS-232C interface. Initial setting: [U.S.A. and Canada models]: YES [Other models]: NO y The settings you made are reflected next time you turn on this unit. ■ Speaker impedance SPEAKER IMP. Use this feature to set the speaker impedance of this unit so that it matches that of your speakers. Choice Descriptions ■ Remote control ID setting REMOTE CON AMP Use this feature to set the remote control ID of this unit for remote control recognition. Choice Descriptions ID1 Select this setting when the ID of the remote control is set to "ID1" 8ΩMIN 6ΩMIN Select this setting to set the speaker impedance to 8 Ω. The impedance of each speaker must be 8 Ω or higher. Select this setting to set the speaker impedance to 6 Ω. The impedance of each speaker must be 6 Ω or higher (front speakers only: 4 Ω or higher). ID2 Select this setting when the ID of the remote control is set to "ID2" Setting remote control ID Use this feature to set the remote control ID. This feature is useful when you control multiple Yamaha AV receiver or amplifier with using the remote control. English 121 En