Yamaha RX-V3900BL Owner's Manual - Page 43
Using the sleep timer, Video information
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
■ Video information HDMI signal Type of the source video signals and the video signals output at the HDMI OUT jacks of this unit. HDMI Resolution Resolution of the input signal (analog or HDMI) and the output signal (HDMI). Analog Resolution Resolution of the source video signals and the analog video signals output at the COMPONENT MONITOR OUT jacks of this unit. HDMI Error Error message for HDMI sources or connected HDMI devices. HDMI error message Device Over HDCP Error (HDMI Message) Out Of Resolution The number of the connected HDMI components is over the limit. HDCP authentication failed. Out of resolution. The connected monitor is not compatible with the resolution of the input video signal. Playback Using the sleep timer Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLET(S) (page 25). Set the operation mode selector to FAMP and then press CSLEEP on the remote control repeatedly to set the amount of time. The sleep timer setting changes as shown below. 120min. 90min. OFF 30min. 60min. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. To cancel the sleep timer Set the operation mode selector to FAMP and then press CSLEEP on the remote control repeatedly to select "SLEEP OFF". y If you set the main zone to the standby mode, the sleep timer is automatically canceled. BASIC OPERATION English 39 En