Yamaha RX-V3900BL Owner's Manual - Page 119
Clearing configurations, Clearing function sets, Clearing a learned function
UPC - 705105565903
View all Yamaha RX-V3900BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
ADVANCED OPERATION Remote control features Clearing configurations You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID. ■ Clearing function sets 1 Press GSETUP using a ballpoint pen or similar object. "SETUP" appears in the display window (4). 4 Press and hold 9ENTER for about 3 seconds. When the clearing is successful, "OK" appears in the display window (4). Notes • "NG" appears in the display window (4) if clearing was unsuccessful. • "ERROR" appears in the display window (4) if you press a button not indicated in the respective step, or if you press more than one button simultaneously. 2 Press 9k / n repeatedly to select "CLEAR" and then press 9ENTER. 3 Press 9k / n repeatedly to select the desired clear mode. Clear mode Descriptions L:DVD (etc.) (L:Three-digit name of the selected control area) Clears all learned functions the respective control area. You can change the control area to be cleared by pressing the desired input selector button (3) or 5SELECT l / h repeatedly. L:AMP Sets all learned functions for controlling the amplifier functions to the initial factory settings. Set the operation mode selector to FAMP to select this clear mode. L:TV Clears all learned functions for TV control area. Set the operation mode selector to FTV to select this clear mode. L:ALL Clears all learned functions. M:DVD (etc.) (M:Name of the selected macro button) Clears the macro programmed for the selected macro button (page 114). The assigned macro to the selected macro button reverts to the initial factory macro. Press the desired macro button if you want to change the macro button you want to clear the programmed functions of. M:ALL Clears all programmed macros. The assigned macro to the selected macro button reverts to the initial factory macro. RNAME Set all the name of the control areas to the default settings. FCTRY Set all settings of the remote control to the initial factory settings. 5 Press GSETUP again to exit from the setup mode. ■ Clearing a learned function 1 Press GSETUP using a ballpoint pen or similar object. "SETUP" appears in the display window (4). 2 Press 9k / n repeatedly to select "ERASE" and then press 9ENTER. 3 Set the operation mode selector to FSOURCE and then press an input selector button (3). If you want to erase the function learned in the AMP or TV control area, set the operation mode selector to FAMP or FTV. 4 Press 9ENTER. "E-KEY" appears in the display window (4). 5 Press and hold the button you want to clear for about 3 seconds. If clearing is successful, "OK" appears in the display window (4). y • If you continuously want to clear another function, repeat step 3 through 5. • Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes). 6 Press GSETUP again to exit from the setup menu. Notes • "NG" appears in the display window (4) on the remote control if clearing was unsuccessful. • "ERROR" appears in the display window (4) if you press more than one button simultaneously. English 115 En