ZyXEL P-660HW-T1 v2 User Guide - Page 132
Port Forwarding Rule Edit
View all ZyXEL P-660HW-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
P-660HW-T v2 User's Guide The following table describes the fields in this screen. Table 44 NAT Port Forwarding LABEL DESCRIPTION Default Server Setup Default Server In addition to the servers for specified services, NAT supports a default server. A default server receives packets from ports that are not specified in this screen. If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Port Forwarding Service Name Select a service from the drop-down list box. Server IP Address Enter the IP address of the server for the specified service. Add Click this button to add a rule to the table below. # This is the rule index number (read-only). Active Click this check box to enable the rule. Service Name This is a service's name. Start Port This is the first port number that identifies a service. End Port This is the last port number that identifies a service. Server IP Address This is the server's IP address. Modify Click the edit icon to go to the screen where you can edit the port forwarding rule. Click the delete icon to delete an existing port forwarding rule. Note that subsequent rules move up by one when you take this action. Apply Click Apply to save your changes to the ZyXEL Device. Cancel Click Cancel to return to the previous configuration. 8.5.1 Port Forwarding Rule Edit To edit a port forwarding rule, click the rule's edit icon in the Port Forwarding screen to display the screen shown next. Figure 75 Port Forwarding Rule Setup 132 Chapter 8 Network Address Translation (NAT) Screens