3Ware 9550SX-4LP User Guide - Page 158
To enable or disable queuing for a unit through 3DM, Management > Controller Settings
UPC - 693494960044
View all 3Ware 9550SX-4LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 8. Configuring Units To enable or disable queuing for a unit through 3DM 1 Choose Management > Controller Settings from the menu bar in 3DM. 2 In the Unit Policies section of the Controller Settings Page, enable queuing by checking the box under "Queuing" for the designated unit; disable it by unchecking the box. The page refreshes, and a message at the top confirms the change you have made. To enable or disable queuing for a unit through 3BM 1 At the main 3BM screen, select the unit by highlighting it and pressing Enter. An asterisk appears in the left-most column to indicate that it is selected. 2 Tab to the Maintain Unit button and press Enter. 3 On the pop-up menu, select Configure and press Enter. 4 In the Configure Disk Array screen, Tab to the field Drive Queuing Mode. 5 Press Enter to display the choices, use the arrow keys to select the setting you want (Enabled or Disabled), and press Enter again to choose it. 6 Tab to the OK button and press Enter to select it. You return to the main 3BM screen. 7 When you are finished making changes, press F8 to save them and exit 3BM. 148 3ware Serial ATA RAID Controller User Guide