Autodesk 235B1-05A761-1301 User Guide - Page 249

4 Specify the new location: If you want to... then... specify exact coordinates for the loca- specify the X, Y, and Z coordinates under Insertion. tion. rotate the part around the X, Y, or Z axis specify the X, Y, and Z values under Normal. rotate the part in the current plane specify an angle for Rotation. Modifying HVAC Parts Use this procedure to modify the mechanical equipment in a drawing. Changes to equipment might require changes to connecting ductwork, although in many cases the ductwork can be updated automatically. To modify HVAC equipment 1 Select the part to modify. NOTE To change all similar parts at once, select a part, click Equipment tab ➤ General panel ➤ Select Similar , and then continue with the modification. 2 Click Equipment tab ➤ Modify panel ➤ Modify Equipment . 3 In the Multi-view Part Modify dialog, specify the changes: If you want to modify... then... the part subtype in the part type folder, select a different part subtype. NOTE You cannot change the type of part. To replace the part with one of a different type, erase the part and add a new one. the part size the elevation select a different part for Part Size Name. select a defined elevation or enter a value for Elevation. NOTE To modify the elevation of the part while maintaining its connection to ductwork, use Elevation grips instead. For more information, see Modifying the Elevation of HVAC Parts and Ducts on page 222. the airflow values for an outlet or supply device click the Flow tab. For outlet devices, modify the airflow value for Flow; for supply devices, modify the airflow value for each connector. Modifying HVAC Equipment | 231