Autodesk 235B1-05A761-1301 User Guide - Page 557

To move a schematic line in isometric mode using grips In isometric mode, the Move Isoplane grip will move the schematic line in the direction which is perpendicular to the plane in which the schematic line lies. 1 Select the line. 2 Click the Move Isoplane grip . 3 Move the line: If you want to... use the grip point as the base point for the move then... drag the line to a new location, and click. specify a base point, and then specify a second point enter b (base point), specify the base point, and then specify the second point. To move or rotate a schematic line using coordinate values A schematic line has an orientation with respect to the world coordinate system (WCS) or the current user coordinate system (UCS). For example, if the schematic line is parallel to the XY plane, then its normal, or perpendicular, plane is parallel to the Z axis. You can change the orientation of the schematic line by aligning its normal with another axis, such as an isometric axis. You can also rotate the schematic line on its plane by changing the rotation angle. 1 Select the schematic line. 2 On the Properties palette, expand Basic. Under Location, click Additional information for the Location worksheet. 3 Specify the new location for the schematic line: If you want to... then... relocate the schematic line enter new coordinate values under Insertion Point. locate the schematic line on the XY plane make the normal of the schematic line parallel to the Z axis: under Normal, enter 1 for Z, and enter 0 for X and Y. locate the schematic line on the YZ plane make the normal of the schematic line parallel to the X axis: under Normal, enter 1 for X, and enter 0 for Y and Z. locate the schematic line on the XZ plane make the normal of the schematic line parallel to the Y axis: under Normal, enter 1 for Y, and enter 0 for X and Z. Moving Schematic Lines | 539