Autodesk 235B1-05A761-1301 User Guide - Page 423

Specify advanced properties 7 Expand Advanced, expand System, and for System, select the system to which the panel belongs. For more information about systems, see Creating Electrical System Definitions on page 363 and Working with Systems on page 93. 8 Expand Design Data, and for Name, enter a unique name for the panel. 9 For Rating, enter a panel rating. 10 For Voltage phase-to-neutral, select from the drop-down list. The voltage list comes from the Electrical Preferences - Voltage Definitions. 11 For Voltage phase-to-phase, select from the drop-down list. The voltage list comes from the Electrical Preferences - Voltage Definitions. 12 For Phases, select the number of phases: 1or 3. 13 For Wires, select the number of wires: 3 or 4. 14 For Main type, select Main lugs only (MLO) or Main circuit breaker (MCB). 15 For Main size (amps), enter the main size. 16 For Design capacity, enter the design capacity. 17 For Panel type, select ANSI or ISO. 18 For Enclosure type, enter an enclosure type. 19 For Mounting, select Surface, Recessed, or Floor. 20 For AIC rating, enter a rating. 21 For Fed from, enter the fed from information. 22 For Notes, enter any notes. Optionally create one or more circuits for the panel 23 If you do not want to create circuits, skip this section and proceed to the section on inserting the panel. Otherwise, expand Circuits, and for Create circuits, select Yes. Adding Panels | 405