Autodesk 235B1-05A761-1301 User Guide - Page 453

If you want to... then... select all of the devices on one or more circuits do the following: ■ Start Circuit Manager. ■ In the left pane, select the circuits, and in the right pane, click . ■ Press Esc twice. ■ Enter deviceprops, enter p (previous), and press Enter. select all of the devices of a specific type While pressing Ctrl, press A to select all of the objects in the drawing. Then enter a modify command: ■ ReceptacleModify - Receptacles ■ LightingModify - Lights ■ SwitchModify - Switches ■ JunctionBoxModify - Junction Boxes ■ CommunicationModify - Communication ■ FireSafetyModify - Fire Safety ■ OtherPowerModify - Other power, i.e., motors ■ SecurityModify - Security 2 If you want to replace the selected devices with those of a different style, on the Properties palette, select a device style: If you want to select a style... then... in the current drawing expand Basic, expand General, and for Style, select the style. in a drawing in the directory specified as the default content location for electrical devices on the General bar, click . In the left pane of the Select Device worksheet, navigate to the drawing that contains the style, and select the drawing. In the right pane, select the style. WARNING Use caution when replacing devices after you have attached wires. If the replacement devices have different connection points than the original devices, the wires do not connect properly, and the circuit is broken. Additionally, if the replacement devices have default values for connector properties (for example, for Voltage or for Number of poles), you might need to modify the values. 3 On the Properties palette, modify other general properties as needed: If you want to change... then... the description for Description, click , enter a description, and click OK. the layer on which the devices are placed for Layer, select a different layer. You can select from the layers in the current drawing. Modifying Devices and Panels | 435