Autodesk 235B1-05A761-1301 User Guide - Page 308

Advanced properties shown expanded NOTE In the following tables, properties related to sloped piped layouts on page 256 are preceded by an asterisk (*). Properties related to flexible pipe are preceded by double asterisks (**) and are only available when you add flexible pipe. Properties Connection details Action Click to open the Connection Details worksheet. Selections For more information, see Viewing Connection Details on page 311. Insulation thickness Enter the insulation thickness on page 317 for the pipe segment. 0 (default) Routing options **Graphics (1-Line, 2-Line) Action Selections Select the desired pattern for flexible pipe. For more information, see Drawing a Flexible Pipe Run on page 310. ■ Circle ■ Curve ■ Oval ■ Single line, single line 2 ■ Vertical, vertical 2 **Pitch *Use fitting tolerance *Branch fitting Enter a pitch value. For more information, see Drawing a Flexible Pipe Run on page 310. Select Yes to turn deflection on at joints that have a tolerance angle specified in the content. This property controls the tolerance for the female fitting connection. ■ Yes (default) ■ No TIP If a fitting (such as a flange) does not support angle of deflection, the software will disregard a Yes selection. See Angle of Deflection (Fitting Tolerance) on page 267. Select the fitting combination you want to use when adding a branch. If you select a double fitting combination (such as Tee or Wye), the software will use the first fitting, and if unsuccessful, will use the second fitting. ■ Tee or Wye (Lateral) (default) ■ Tee only ■ Takeoff only ■ Wye (Lateral) only ■ Wye (Lateral) or Tee 290 | Chapter 7 Drawing Piping Systems