Autodesk 235B1-05A761-1301 User Guide - Page 815

Working with the U.K Profile 17 AutoCAD MEP includes a U.K. profile containing content based on the British Standards Institute (BSI) standards and other standards for metric design. The profile includes content and tools that support the design requirements of the U.K. and German markets, such as ■ Predefined hanger styles ■ Object tools for adding hangers to drawings ■ Command tools for adding hanger schedules to construction documents The U.K. profile also is configured to load a set of related features and commands when you make it the current profile. These features include but are not limited to ■ Support for creating hanger styles in Style Manager ■ Commands for working with hangers ■ Commands for rotating cable trays and connected objects This chapter provides information on using this set of related features and commands. NOTE If you are not using the U.K profile, see Using Other Profiles on page 797. Using Other Profiles If you are not using the U.K. profile, you can still use the features and commands discussed in this chapter, but, in some cases, you might need to create supporting content beforehand. If you make the Global profile (included in the Global content pack) the current profile, the features and commands are loaded by default. If you make a different profile current, you can access them by doing either of the following: ■ Enter any command discussed in this chapter when you need it. This action loads the required module on demand. ■ Enter loadmetriccmds to permanently configure the profile to always load the module at startup. 797