Autodesk 235B1-05A761-1301 User Guide - Page 541

2 In the Schematic workspace, open the style by doing one of the following: ■ Click Manage tab ➤ Style & Display panel ➤ Style Manager drop-down ➤ Schematic Line Styles . In the left pane of the Style Manager, select the style. ■ In the drawing, select a schematic line that uses the style, and click Schematic Line tab ➤ General panel ➤ Edit System Style drop-down ➤ Edit Schematic Line Style . 3 Click the Designations tab. 4 Define the designations: If you want to... add a designation edit a designation delete a designation then... click , click the Designation field, enter an ID, and press ENTER. click the corresponding Designation field, edit the ID, and press ENTER. select a designation, and click . Specifying Annotation for Schematic Line Styles When you draw a schematic line, you can select a style for the line on the Properties palette. The style determines the annotation properties for the line, such as the symbols used to represent start points, endpoints, and connections. The style of a schematic line also determines how crossing lines are displayed. You can display crossing lines as is, or with an overlap or a break of a specific width. If you select the overlap style or break style, you must also specify a corresponding priority value. In a drawing, if 2 crossing lines have the same priority value in their corresponding styles, the line with the lower Configuring Styles for Schematic Lines | 523