Autodesk 235B1-05A761-1301 User Guide - Page 720

Modeling with Primitives Primitives are limited versions of part models that are designed for repeated use in part creation. They represent basic shapes, such as a box or a torus, and commonly used connections on parts, such as a flanged pipe connector or duct connector. Because primitives include many of the modeling features that you need to build a custom parametric part, such as profiles and modifiers, you can use them to quickly build a part model and add connections. Building a Part Model from Primitives 1 Begin a new parametric part, specify its part configuration, and add the default work planes (ZX plane, YZ plane, and XY plane). RELATED For more information, see Starting Content Builder for Creating a Parametric MvPart, Specifying the Part Configuration of a Parametric MvPart, and Establishing the Work Planes of a Parametric MvPart. 2 In the part browser, click . Insert Primitive dialog 3 In the Insert Primitive dialog, select the primitive to add to your part model, and click Insert. 4 Select the work plane on your part to which to attach the primitive: If you want to... then... attach the primitive to an existing work plane in the modeling area, select the work plane. attach the primitive to the face of an existing primitive or modifier press ENTER, and, in the modeling area, select the face of the primitive or modifier. NOTE This creates a reference work plane on the selected face and attaches the primitive to the new plane. To facilitate the selection of a plane or face, the software highlights the plane or face when you move the cursor over it. 702 | Chapter 14 Customizing Catalog-Based Content