Brother International HL-2600CN Users Manual - English - Page 180
Size Error T1/2, No Tr Roller
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
CHAPTER 6 TROUBLE SHOOTING Error Message CHANGE FCR Replace the cleaning roller. NO OPC BELT Install the OPC belt. NO FC ROLLER Install the cleaning roller. NO LFU Install the lower tray unit. NO TR ROLLER Install the transfer roller. ILLEGAL TONER Use only Brother genuine toner cartridge. NO TRAY 1/2 The indicated paper tray was not detected. Install it, or ensure that it is inserted correctly. SIZE ERROR T1/2 Specify the correct paper size for the indicated tray. SIZE ERROR DX The duplex unit can print only in the sizes specified. Specify the correct paper size. STACKER FULL Remove the paper from the output tray. MEDIA MISMATCH Media mismatch between the Printer and the Printer Driver setting. Load XX into Tray . SIZE MISMATCH Paper mismatch between the Printer and the Printer Driver setting. Load Paper size into Tray MANUAL FEED Load paper into Tray1, and then press GO. MEDIATYPE ERROR Specify the correct media type: XX XX=T1, T2, or DX NO FUSING UNIT A fusing unit was not detected. Please install one. CARD ERROR An error occurred when accessing the Flash card. Check that the driver is formatted and not in Write Protect mode. Remarks When the Duplex Unit is installed. XX = Plain Paper, Transparencies, Thick Paper XX = T1, T2 or DX 6-2