Brother International HL 5280DW Network Users Manual - English - Page 68
Netbios/ip, Set Default, Apply, Wireless, Yes&report
UPC - 012502614456
View all Brother International HL 5280DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Control panel setup ■ PASSWORD If you have selected LEAP for an authentication mode, you will need to enter a password that is 32 characters or less in length. ■ APPLY In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS 8 sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used unless you switch the printer off and then on again. NETBIOS/IP You can enable and disable the NetBIOS facility to obtain the IP address. SET DEFAULT You can restore the WLAN menu settings to factory default. 8 - 10
Control panel setup
8 - 10
8
■
PASSWORD
If you have selected
LEAP
for an authentication mode, you will need to enter a password that is 32
characters or less in length.
■
APPLY
In order to make your wireless settings effective, you must select the
APPLY
option from the
WIRELESS
sub menu and then select
YES
or
YES&REPORT
. If you do not do this, the network settings will not be used
unless you switch the printer off and then on again.
NETBIOS/IP
You can enable and disable the NetBIOS facility to obtain the IP address.
SET DEFAULT
You can restore the
WLAN
menu settings to factory default.