Brother International MFC 8640D Users Manual - English - Page 111

Broadcasting Broadcasting is when the same fax message is automatically sent to more than one fax number. Using the Set key, you can include Groups, One-Touch, Speed-Dial numbers and up to 50 manually dialed numbers. If you did not use up any of the numbers for Groups, access codes or credit card numbers, you can 'broadcast' faxes to as many as 290 different numbers (MFC-8640D) or 390 different numbers (MFC-8440/8840D/8840DN). However, the available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use Dual Access and Delayed fax. To include One-Touch or Speed-Dial numbers and manually dialed numbers in the same broadcast, you must press Set between each of the numbers. Use Search/Speed Dial to help you choose the numbers easily. (See Setting up Groups for Broadcasting on page 7-4.) After the broadcast is finished, a Broadcast Report will be printed to let you know the results. ■ Enter the long dialing sequence numbers as you would normally, but remember that each One-Touch and Speed-Dial number counts as one number, so the number of locations you can store becomes limited. ■ If the memory is full, press Stop/Exit to stop the job or if more than one page has been scanned, press Start to send the portion that is in the memory. 1 If it is not illuminated in green, press (Fax). Place the original face up in the ADF, or face down on the scanner glass. 2 Enter a number using One-Touch, Speed-Dial, a Group number, Search or manual dialing using the dial pad. (Example: Group number) 3 When the LCD displays the fax number of the other party, press Set. You will be asked to press the next number. SETUP SEND 6 - 16