Brother International MFC 8640D Users Manual - English - Page 83

Setting the F/T Ring Time (Fax/Tel mode only) If you set the Receive Mode to Fax/Tel, you'll need to decide how long the MFC will signal you with its special pseudo/double-ring when you have a voice call. (If it's a fax call, the MFC prints the fax.) This pseudo/double-ring happens after the initial ringing from the phone company. Only the MFC rings (for 20, 30, 40 or 70 seconds) and no other phones on the same line will ring with the special pseudo/double-ring. However, you can still answer the call on any extension phone (in a separate wall jack/phone socket) on the same line as the MFC. (See Operation from extension telephones on page 5-7.) 1 If it is not illuminated in green, press (Fax). 2 Press Menu, 2, 1, 2. 3 Press or to select how long the MFC will ring to alert you that you have a voice call. 21.Setup Receive 2.F/T Ring Time ▲ 20 ▼ 30 Select ▲▼ & Set Press Set. 4 Press Stop/Exit. Even if the caller hangs up during the pseudo/double-ringing, the MFC will continue to ring for the set time. SETUP RECEIVE 5 - 3